When setting up your terminal, or sometimes during use, you may see error notices pop up if there is a problem. Here are some guidelines on different errors that are possible:
Failed to Get Network Parameters
If you see an error like this it is likely your Ethernet cable is not firmly seated in one or more of its ports. Check the cable and make sure it is firmly plugged in. Also, be sure to use the Ethernet port that is closest to the power jack on your processing terminal, if you're using a different port, that may be causing the issue.
If you still see the error message, your terminal is not receiving internet connection data through your router, so you need to make sure you have an RJ-45 cable (Ethernet) and that your router ports are properly functioning.
Wireless Ethernet Setup
There is a connector you can purchase for your Verifone MX915 that will allow it to connect wirelessly, if you like. Follow the setup instructions that come with the connector, and make sure you have it connected to your wireless network before proceeding with the integration.
Pin Pad Not Ready
If you see an error like this, your processing terminal just needs to be refreshed.
Manual Card Entry (Phone Orders)
If you need to process a transaction and don't have the card at hand, as in a phone order, from the Register you'll proceed as if you're doing a normal Card payment method, send the amount over to the terminal by clicking the Pay button, but on the terminal click the red X button once, and it will prompt you to manually enter the card info. Be careful not to click it twice, as the second click will cancel everything out and you'll have to start over.
Canadian / Other International Credit Cards
Please note, such cards will need to have the logo of any of the major credit card companies. The main problem with these transactions is the lack of Zip codes in foreign addresses, so for the Zip code, enter 00000, and it is likely to go through.